hydraulic hose

Hydraulic hose transportation

Hydraulic hose in the loading and unloading process, should note the following points

Hydraulic hose in the loading and unloading process, to do light loading and unloading.

Hydraulic tubing to be classified volumes (articles) neatly shipped, to avoid excessive bending of the pipe, and should not be stacked on the hose other heavy objects.

Do not mix the hydraulic pipe with acid, alkali, oil and organic solvents, flammable and explosive materials. The hydraulic pipe body should not be in direct contact with the goods with sharp edges.

For hydraulic hose that need to be transported straight, when the length exceeds the loading compartment, the extra long part of the hose shall be supported by the bracket to prevent the hydraulic rubber hose from being damaged on the ground.

If the rubber hydraulic hose is to be parked in the open space (or shop dock) for some reason, the site must be flat, the hydraulic tube should be flat and flat, and do not pile up the weight. At the same time, the hose can not be in contact with the heat source.

When handling the hose, it should not be dragged, heavy hose should be used lifting equipment or special equipment handling, and to prevent accidental damage to the hose.