Paint Spray Hose

An airless paint spraying system gives a glass-smooth layer of coating over surfaces that is practically impossible to achieve using a brush or roller.The spray tube is the most important in the system. Let me introduce you to the details below.

Inner tube: Internal Core in Polyamide
Reinforcement: 1 or 2 high tensile aramidic braid with antistatic polymerice braid
Outer tube: blue pin pricked polyurethane high abrasion resistance
Safety factor: 4:1
Application: high pressure airless spray systems,chemical resistance solvents and aggressive fluids
Temperature range: -40℃ (-40°F) – 100℃（+212°F）max.temperature recommended for water base
hydraulic fluids and air : +70℃ (+ 158°F)

Inner tube: Internal core in polyamide
Reinforcement: 1 or 2 high tensile steel wire braid
Outer tube: blue pin pricked polurethane high abrasion resistance
Safety factor: 4:1
Application: high pressure airless spray systems,chemical resistance solvents and aggressive fluids
Temperature range: -40℃ (-40°F) – 100℃（+212°F）max.temperature recommended for water base
hydraulic fluids and air : +70℃ (+ 158°F)

After finishing the paint spray hose, we will pack the hose. In general, the packing will
use woven bag and plastic film. Special packing is available according to customers’ requirements.