Hydraulic Hose SAE 100 R1
SAE 100 R1 steel wire reinforced hydraulic hose is suitable for medium pressure hydraulic lines. Meets or exceeds the requirements of SAE 100 R1 Type AT andperformance requirements of EN 853 1SN.. It can bear higher working pressure than other rubber hoses thanks to its high tensile braided steel wire reinforcement. It is composed of three parts: tube, reinforcement and cover. The tube is made from oil resistant synthetic rubber, making the hose have excellent performance in delivering oils. The reinforcement is made from one layer of high tensile braided steel wire, making the hose have outstanding high pressure resistance. The cover is made from high quality synthetic rubber, making the hose resistant to abrasion, corrosion, weather, ozone, aging, sunlight and cut. Therefore, it has longer service life.
Medium pressure hydraulic lines. Meets or exceeds the requirements of SAE 100 R1 Type AT and
performance requirements of EN 853 1SN.
Mine hydraulic support,oilfield extraction machinery,mine / road / construction machinery
Black,oil resistant,synthetic rubber
One braid of high-tensile steel wire.
Black,oil,brasion and weather resistant,synthetic rubber.
-40℉ to +250℉ (-40℃ to +121℃)
Products Application :
Hydraulic hose SAE 100R1 / EN 853 1SN can be used for forklift, hydraulic engine, oilfield extraction machinery, mine / road / construction machinery and so on.
imported rubber materials LG NBR rubber from South Korea,
imported BELKTA steel wire with high tensile strength2750Mpa from Belgium.
Good quality materials make our hydraulic hose steady performance ,
good decentrality, excellent oil resistance.
Our factory introduce advanced technology and equipment to make the bets quality hydraulic hose.
Our bunching Machine is SEJIN MACHINE from Korea.The advantages of the machine are high accuracy ,high consistency,suspension difference < 70MM,the international standard is 120MM.
We use Mitsubishi electric control braiding machine .We use the machine can get high accuracy data collection, real-time braiding angle monitoring and correction.
Our factory has strong quality control team, we set up advanced laboratory.
Before the mass production, we test each batch of raw material
After the production, we test each hose to guarantee a 100% qualification.
Each hose tested at 2 times of working pressure.
We do everything possible to supply good quality goods for our customer.
After finishing the Hydraulic Hose production, we will pack the hose. In general, the packing will
use woven bag and plastic film. Special packing is available according to customers’ requirements.