Hydraulic pipes are common parts in industrial production, and if the storage is improper, it is easy to cause the hydraulic pipe to malfunction. As a professional hydraulic pipe manufacturer, let me introduce the precautions when storing hydraulic pipes.
1. The hydraulic pipe is stored in a relaxed state as much as possible. Generally, the hose with an inner diameter of 76 mm or less can be stored in coils.
2. During the storage of the hydraulic pipe, it is strictly forbidden to stack heavy objects on the pipe body and prevent external crushing and damage.
3. When storing the hydraulic pipe, do not contact with acid, alkali, oil and organic solvents or other corrosive liquids or gases, and should be separated from the heat source by 1m.
4. During the storage of the hydraulic pipe, it should not exceed 2 years, and should be used first before the storeer to prevent the quality of the hose from being affected due to long storage.
5. If the hydraulic pipe needs to be temporarily stored in the open air, the site should be leveled, the hose should be laid flat and flat, and the upper cover should be covered, and the heavy objects should not be piled up; at the same time, the hose can not be in contact with the heat source.
6. The storage location of the upper and lower hoses should be kept clean and ventilated. The relative humidity should be below 80%. The temperature at the storage location should be kept between -15 °C and 40 °C, and the hose should be protected from direct sunlight and water.
7. When the hydraulic pipe is stored, the two ends of the hose are tightly sealed to prevent debris from entering the hose.
8. When storing the hydraulic pipes, they should be placed according to different specifications. Do not mix and stack, and hang the management card.
9, in order to prevent the tube from being compressed and deformed when the hose is stored, the stacking should not be too high, the height should not exceed 1.5m; and the hose is required to be “back up” during storage, not less than once a quarter.
The above is related to the need to pay attention to the storage of hydraulic pipes, I hope to help you.