Hydraulic hoses are widely used in industrial production. Choosing the right hydraulic hose can bring a lot of convenience to our production. As a professional hydraulic hose manufacturer, let’s share the four criteria to be followed when selecting a hydraulic hose.

1. Under the same pressure and inner diameter conditions, select a hydraulic hose with a small bending radius. Such a rubber hose is not easily damaged when it is working.
2. Try to select the hydraulic tube with the protective membrane added outside the tube to avoid the damage of the rubber layer on the outer layer of the rubber tube.
3. When selecting according to the pressure of the hydraulic hose, the impact load should be considered, and the working pressure of the hose should be greater than the working pressure of the construction machine.
4. Choose steel wire wound hydraulic pipe instead of steel wire braided hydraulic pipe as much as possible, because when the hydraulic hose is tortuous, the weaving process hydraulic pipe is more likely to wear and polish than the surrounding process hydraulic pipe, and it is easier to generate heat between the steel wires, resulting in heat generation. The wire reinforcement layer is damaged prematurely.
In addition to the above points, the following factors should be considered when purchasing hydraulic pipes, such as the temperature of the working environment, whether there is any grounding area, and what connection method is used in the connection area. You need to consider these factors in combination and choose the right hydraulic hose.